Accessories

Label Holders
Easy identification of shelf contents
Available in 4 styles and variety of sizes: 1 1/4″, Clear, Slanted

Label Size	Fits	Gray	Clear	Gray Slanted
3 x 1.25	all	H9990P	H9990CL	H9990SL
13 x 1.25	18	H9990P1	H9990CL1	H9990SL1
19 x 1.25	24	H9990P2	H9990CL2	H9990SL2
25 x 1.25	30	H9990P30	H9990CL30	H9990SL30
31 x 1.25	36	H9990P3	H9990CL3	H9990SL3
43 x 1.25	48	H9990P4	H9990CL4	H9990SL4
55 x 1.25	60	H9990P5	H9990CL5	H9990SL5
3 x 1.25	all	Conductive Label Holder		H9990PESD
37 x 1.25		Conductive Label Holder		H9990P6ESD

 

Color Identification Tubes
Tubes slip onto posts of assembled shelving units
Provides color-coded organization to shelf contents
All 8” long

Yellow	Flame	Black	Grey	White
HCIT8Y	HCIT8F	HCIT8BL	HCIT8G	HCIT8W

 

Color Shelf Markers
6″ colored storage identification markers, available in six colors, differentiate stored products; easily mount to shelving

Blue	Green	Red	Tan	White	Yellow	Gray
HCSM6B	HCSM6G	HCSM6R	HCSM6T	HCSM6W	HCSM6Y	HCSM6GR

 

Shelf Ledges

For stationary or mobile installations, stackable ledges prevent items from protruding or falling from shelves.  In many cases a one-inch ledge will serve the purpose while allowing access to the shelf from all sides.  When a higher ledge is needed, the four-inch size can be used.  For enclosure of the entire back of a shelving unit, rods and tabs ( details below ) can be used.

1” High Shelf Ledges Side and Back
Lgth	Chrome	Price	Stainless
14	HL14N-1C	$ 8.80	HL14N-1S
18	HL18N-1C	$ 9.60	HL18N-1S
21	HL21N-1C	$10.30	HL21N-1S
24	HL24N-1C	$11.00	HL24N-1S
30	HL30N-1C	$12.90	HL30N-1S
36	HL36N-1C	$14.30	HL36N-1S
42	HL42N-1C	$14.70	HL42N-1S
48	HL48N-1C	$15.00	HL48N-1S
54	HL54N-1C	$17.60	HL54N-1S
60	HL60N-1C	$17.60	HL60N-1S
72	HL72N-1C	$18.25	HL72N-1S
4” High Shelf Ledges Side and Back
Lgth	Chrome	Price	Stainless
14	HL14N-4C	$11.75	HL14N-4S
18	HL18N-4C	$12.90	HL18N-4S
21	HL21N-4C	$13.60	HL21N-4S
24	HL24N-4C	$14.30	HL24N-4S
30	HL30N-4C	$16.90	HL30N-4S
36	HL36N-4C	$18.25	HL36N-4S
42	HL42N-4C	$23.25	HL42N-4S
48	HL48N-4C	$23.25	HL48N-4S
54	HL54N-4C	$24.65	HL54N-4S
60	HL60N-4C	$24.65	HL60N-4S
72	HL72N-4C	$29.65	HL72N-4S
Note:  actual shelf length approx. 1” shorter than nominal listed

 

Shelf Dividers

Shelf dividers enable you to compartmentalize shelves and help keep shelf contents orderly.  Because they snap into place they can be positioned are repositioned to exact size of the section needed.  All are 8” (203mm) high.

Shelf Width	Chrome Part #	Stainless Part #
14	HDD14C	HDD14S
18	HDD18C	HDD18S
21	HDD21C	HDD21S
24	HDD24C	HDD24S
30	HDD30C	HDD30S
36	HDD36C	HDD36S

 

Rod with Tab

Rods hook over wires of top shelf and are attached to each of the other shelves with spring-clip tabs.  Each rod requires one tab for each shelf except the top shelf.  Rods are shipped with sufficient tabs for a 4-shelf unit.  Additional tabs can be ordered under part # H9084Z.

Rods can form side and back enclosures for a shelving unit, or can serve as uniform dividers by passing through shelves from top to bottom.

Recommended spacing: every 6″ (150mm) to 12″ (305mm)

Min Post Hgt.	Chrome Part #	Stainless Part #
54	HR52C	HR52S
63	HR61C	HR63S
74	HR72C	HR72S
86	HR84C	HR84S

 

Shelf Slides
Attaches easily to shelf with support brackets.
Spaced to fit any width container or tote box.

 

One-Piece Slides
Formed from a solid aluminum sheet, which attaches to the shelf with support brackets.
They serve to cover a tote box when in the closed position.

 

Foot Plates

Replaces the leveling bolt on the base of SiteSelect posts.  Used when units are to be bolted to the floor or, without bolts when a broader foot is desired.

Zinc:         Part # H9993Z,   
Stainless:  Part # H9993S,   

 

Glides
Fit over leveling bolt to protect tile floors
Part # H9991P,   

 

Post Clamps
For maximum strength in adjacent shelving units, the post clamp is recommended.  With it, each unit is supported by four posts and buttressed by the adjacent unit.
Part # H9994Z,   

 

Hole Plugs
Used to fill shelf corner openings where posts have been eliminated by use of “S” hooks
Part # H9997C,